Oppo is preparing to release its Reno10 series, which consists of upper-midrange smartphones. Based on the company’s previous release pattern for the Reno line, we can expect the Reno10, Reno10 Pro, and Reno10 Pro+ to be unveiled in the coming weeks. As a result, there are more leaks emerging.
Recently, CAD-based renders of the Reno10 Pro, the middle device in the series, were revealed. These renders indicate that the Reno10 phones will feature a fresh rear design in comparison to their predecessors, which were launched in China last year.
The renders’ source suggests that the Reno10 Pro will feature a 6.7-inch display with a centered hole-punch cutout for the front-facing camera, as shown in the pictures. The device is reportedly 163.2 x 74.2 x 7.9 mm in size, and the rear camera bump makes it 10.2 mm thick in that area.
At the bottom of the Reno10 Pro, there are a speaker grille and a USB-C port, while the right side appears to have both the power and volume buttons. This is unusual because Oppo has traditionally placed the volume buttons on the left side. It is uncertain whether the introduction of the Reno10 series will alter this or if the renders are inaccurate. We will have to wait and see.
The leaked renders of the Oppo Reno10 Pro highlight the new design. Previous leaks suggest that the Reno10 Pro will be powered by the MediaTek Dimensity 8200 SoC, which is a minor update to the 8100 used in the Reno9 Pro.
Currently, we only have limited information about the specs of the Reno10, except for rumors about its more premium sibling, the Reno10 Pro+. It is speculated that the top-of-the-line Reno model will have a periscope zoom camera on the back, a 6.74-inch curved 1220×2712 120 Hz display, a 50 MP primary camera featuring Sony’s IMX890 sensor, a 4,700 mAh battery capable of 100W charging, and will be powered by the Qualcomm Snapdragon 8+ Gen 1 SoC. The device may also offer up to 16GB of LPDDR5 RAM and up to 512GB of storage.