Take a fresh look at your lifestyle.

In TENAA, the Redmi Note 11 Sports a 6.66-inch Screen, a 4,900 mAh Battery, and a 16-megapixel Camera

0 100

Get real time updates directly on you device, subscribe now.

There are other sources of information, such as TENAA, which certified a phone that according to Digital Chat Station is the vanilla model. Xiaomi’s official Weibo account continues to tease features for the Redmi Note 11 series (mainly the Pro).

This device has a 6.6-inch, 1,080×2,400-pixel display (20:9). It is listed as an OLED on TENAA, but DCS claims this is an error and the phone actually comes with an LCD (the Pro model is confirmed to have an OLED panel, though). According to the leak, the fingerprint reader will be located on the phone’s side rather than on the back. We can’t confirm this because TENAA hasn’t released any images of the phone.

On the back, there are two cameras: a 16-megapixel primary sensor and a 5-megapixel secondary sensor. The 108 MP camera on the Pro model offers significantly more resolution. Another distinction between vanilla and Pro phones is their operating system.

The Dimensity 810 chipset reportedly powers the Note 11, which is a scaled-down version of the Dimensity 920 found inside the Note 11 Pro. As listed by the Chinese regulator, memory configurations include 4/6/8/12 GB of RAM and 64/128/256/512 GB hard drives. If you have a microSD card (especially the 12/512 GB option on a middle model in a mid-range series), that’s even more impressive.

The battery has a capacity of 4900 mAh. This model (21091116AC) apparently also went through the 3C where it was certified with a 33W charging rate, but the rate is not mentioned (again, quite a way away from the 120W charging of the Pro). Also, this model number has been linked to the Poco M4 Pro, which is expected in November. As a result, different product lines may use different versions of the same hardware.

Xiaomi 21091116AC at the 3C with 33W charging
Xiaomi 21091116AC at the 3C with 33W charging (source)

Anyway, here are a few more tidbits about the (probable) Redmi Note 11 from TENAA. In addition to the standard audio input, it’ll have an IR blaster and a 3.5 mm headphone jack. It weighs 195g and has dimensions of 163.56×75.78×8.75mm.

The Redmi Note 11 series will be wrapped up with some official information. Rather than a speaker + earpiece, Xiaomi’s teaser campaign today emphasizes “JBL Symmetric Stereo,” which is stereo sound with two equal speakers. While gaming or watching videos on the phone, the two speakers are positioned so that your hands won’t get in the way. Dolby Atmos, Hi-Res Audio, and Hi-Res Audio Wireless are all included in the series.

The big reveal will take place on the 28th of October.

Check out images:

TENAA specs for the Xiaomi 21091116AC - allegedly the vanilla Redmi Note 11
TENAA specs for the Xiaomi 21091116AC – allegedly the vanilla Redmi Note 11
TENAA specs for the Xiaomi 21091116AC - allegedly the vanilla Redmi Note 11
TENAA specs for the Xiaomi 21091116AC – allegedly the vanilla Redmi Note 11

 

The Redmi Note 11 series will feature JBL Symmetric Stereo speakers with Dolby Atmos support
The Redmi Note 11 series will feature JBL Symmetric Stereo speakers with Dolby Atmos support

The Redmi Note 11 series will feature JBL Symmetric Stereo speakers with Dolby Atmos support

The Redmi Note 11 series will feature JBL Symmetric Stereo speakers with Dolby Atmos support

Via GSMArena
Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.